PAGE # 5
Call 1-877-744-3649 for assistance or visit us at www.phoenixinno.com
STEP 8:
Attach side burner & valve
1. Remove 2 small screws located in the side burner valve (N).
(See Fig. 7)
2. Insert side burner valve (N) from the back of the right side shelf (M) and align with side burner bezel (I-1).
(See Fig. 7.1)
3. Insert 2 small screws (removed from burner valve) to secure bezel (I-1) and side burner valve (N).
(See Fig. 7.1)
4. Place side burner control knob (H-1) on side burner valve (N) and push to secure. (
See Fig. 7.1)
5. Remove 2 small screws from bottom of side burner (F-1).
6. Insert side burner (F-1) through hole in right side shelf top (L) and mount onto side burner valve (N) (
See Fig. 7.3)
and secure with 2 small screws. (See Fig. 7.2)
7. Place side burner grate (E-1) over the side burner (F-1).
(See Fig. 7.2)
8. Attach ignitor wire (L-1) to side burner ceramic electrode.
(See Fig. 7.4)
For Models:
PH503SBB
PH503SBBN
STEP 7:
Attach right side shelf
1. Loosen 2 bottom bolts already installed in the BBQ grill head (K). DO NOT REMOVE.
(See Fig. 6)
2. Place right side shelf onto right side of BBQ grill head (K) by lining up
2 bottom keyholes in right side shelf (L) with 2 bolts loosened from
BBQ grill head (K). Lower the side shelf into place. DO NOT TIGHTEN BOLTS.
3. From the inside of the BBQ grill head (K), use 3 medium bolts and 3 large washers
to secure side shelf. Tighten once in place.
4. Tighten the 2 bottom bolts.
5. Secure right side shelf front (M) to grill head (K) with 1 medium bolt.
Fig. 6.1
Fig. 6
Fig. 7.1
Fig. 7.3
Fig. 7.2
Fig. 7
N
M
K
L
M
K
REMOVE
REMOVE
N
Fig. 7.4
L-1
Ceramic
Electrode
