13
59
10
2
3
59
53
2
10
53
3
10
STEP 11
Remove two Cross Recessed Pan Head Bolts from the Computer (10). Remove bolts with
the Allen Wrench with Phillips Screwdriver provided.
It is recommended to have a second person assist with this step. One person should hold
the Computer (10) in place while the other person to connect the wires.
Connect the Extension Sensor Wire (59) and Hand Pulse Sensor Wires (53) to the wires that
come from the Computer (10).
STEP 12
Tuck wires into the Handlebar Post (3) and then attach the Computer (10) onto the top end
of the Handlebar Post (3) with two M5x10 Cross Recessed Pan Head Bolts (47) that were
removed. Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
3
10
47
3
47
10
