manualshive.com logo in svg

Life Fitness Hammer Strength PL-4W, Руководство пользователя

Поделиться
Скачать
Life Fitness Hammer Strength PL-4W Скачать руководство пользователя страница 33

Linear Hack Squat (PL-LHS)

Machine Weight:

lbs. = 423

kg. = 191.9

Max User Weight:

lbs. = 350

kg. = 158.8

Starting Resistance:

lbs. = 90

kg. = 40.8 kgs.

Total Max Resistance:

lbs. = 720

kg. = 350

Max Plate Capacity*:

8-45 lb. plates

7-25 kg. plates

Size** (L x W x H):

in. = 84 x 61 x 54

cm = 213 x 155 x 137

Live Area*** (L x W x H):

in. = 84 x 85 x 90

cm = 213 x 216 x 229

NOTE: *Capacities listed are calculated using a thickness of 1-5/8" for 45lb weight plates and 48mm for 25 kg weight
plates. If your facility uses thicker weight plates, the capacity may be reduced.

NOTE: **Dimensions are without weight plates.
NOTE: ***Live Area dimensions calculated and shown assuming a weight plate diameter of 46 cm.

Muscles Exercised:

 Quadriceps, Hamstrings and Glutes

Setup

Set center safety stop to desired range. Load the unit with desired amount of weight to ensure appropriate resistance
and secure plates with retaining pin. Position feet on the foot plate, hip width apart. Position the body seated against
pads. Grip handles on each side of the seat carriage.

Performing the Exercise

With a controlled motion, push legs to nearly full extension without locking out the knees. Move gripped left and right
lever stops out of the carriage path by pulling them towards the hips. Do not release the handles until exercise is
complete and carriage is resting on lever stops. Return to start position and repeat the motion while maintaining
proper body position. When finished, raise carriage, push both handles away from the hips, and gently set carriage
down on lever stops.

Page 31 of 62

Содержание Hammer Strength PL-4W



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды