manualshive.com logo in svg

Life Fitness Hammer Strength PL-4W, Руководство пользователя

Поделиться
Скачать
Life Fitness Hammer Strength PL-4W Скачать руководство пользователя страница 29

Gripper (PL-GRIP)

Machine Weight:

lbs. = 65

kg. = 29.5

Max User Weight:

lbs. = 350

kg. = 158.8

Starting Resistance:

lbs. = 14

kg. = 3.6 kgs.

Total Max Resistance:

lbs. = 180

kg. = 75

Max Plate Capacity*:

4-45 lb. plates

3-25 kg. plates

Size** (L x W x H):

in. = 50 x 28 x 47

cm = 127 x 71 x 119

Live Area*** (L x W):

in. = 62 x 76

cm = 157 x 193

NOTE: *Capacities listed are calculated using a thickness of 1-5/8" for 45lb weight plates and 48mm for 25 kg weight
plates. If your facility uses thicker weight plates, the capacity may be reduced.

NOTE: **Dimensions are without weight plates.
NOTE: ***Live Area dimensions calculated and shown assuming a weight plate diameter of 46 cm.

Muscles Exercised:

 Brachioradialis, Flexor Carpi Radialis, Flexor Carpi Ulnaris and Extensor Retinaculum

Setup

Load the unit with desired amount of weight to ensure appropriate resistance and secure plates with retaining pin.
Grip the frame handles with the inside of thumbs while fingers grip the movement arm handles.

Performing the Exercise

With a controlled motion, pull fingers towards thumbs by making a fist. Return the movement arm to the start position
and repeat the motion while maintaining proper body positioning.

NOTE: DO NOT place feet under movement arm while in use!

Page 27 of 62

Содержание Hammer Strength PL-4W



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды