Attach Uprights
1.
Run cables up through the left upright.
2.
Attach left upright to upright support.
3.
Run cables up through the right upright.
4.
Attach right upright to upright support.
5. Tighten all hardware 50%.
Item
Description
Qty.
1
Left Upright
1
2
M12 X 30 Hex Button Head Screw
6
3
M12.5 Washer
6
4
Right Upright
1
NOTE: Hand tighten the screws.
Secure Bridge Assembly to Uprights
Item
Description
Qty.
1
Bridge Assembly
1
2
M12 X 30 Hex Button Head Screw
6
3
M12.5 Washer
6
84 Nm (62 ft. lbs.)
NOTE: Fully Tighten hardware securing uprights to the upright support after securing the bridge assembly to the
uprights,
Item
Description
Qty.
84 Nm (62 ft. lbs.)
Page 23 of 35
