USER MANUAL / DL-PSMV62
15
Front Panel Control
There are two switching modes in full screen mode; Manual and Auto switching.
The latter only works in full screen mode. Press the
AUTO
button to enable or
disable the auto-switching mode.
When in auto switching mode, the switcher will switch to the available active inputs
with the following priority: 1-HDMI > 2-HDMI > 3-HDMI > 3-DP > 4-HDMI > 4-USB-C.
When an input source and output window are connected, the corresponding LEDs
will illuminate blue.
To manually make an input switch press the
AUTO
button to disable auto switching
mode, then press the desired
INPUT
button.
Full Screen Mode
Signal Switching
When in multi-view mode and using a multi-view layout (see Multi-View Mode
Selection), you can manually assign inputs 1-4 to the A-D windows in the layout.
To do so, press an
INPUT
button. The input LED illuminates blue, the windows A~D
LEDs flash. Then press the desired window button (
A-D
). All window LEDs, besides
selected window LEDs will go out, then the selected input and selected window LED
will flash three times. Lastly, the selected input LED goes out and windows A~D
LEDs illuminate blue.
Multi-view Mode
Switching Status Inquiry
Press and hold a windows button (A-D) at least 3 seconds. Inputs LEDs not assigned
to the window button will go out, the corresponding input source LED will illuminate
blue. After 3 seconds, Window A, B, C and D LED illuminate blue.
Содержание DL-PSMV62
Страница 4: ...USER MANUAL DL PSMV62 4 ...
