LIBERTY AV SOLUTIONS DL-PSMV62, Руководство пользователя

Страница: 13 / 46

USER MANUAL / DL-PSMV62 13
Connecting Ethernet Control
The DL-PSMV62 can be controlled via Ethernet through a web browser interface and listens
to TCP commands on port 4001.
The TCP/IP port requires a standard straight-through
Category 5 or greater cable with the TIA/EIA-568B
crimp pattern for optimal operation.
The default settings for the TCP/IP port are: 4001
IP address: 192.168.0.178
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
Connect the Ethernet cable between to the switcher and a
router with a straight-through cable or between the matrix and a
computer with a crossover cable.
Web Browser Control
The DL-PSMV62 includes a web portal to allow control of the matrix via a standard web
browser. The IP address is the same address that is used for TCP/IP control.
Connecting IR Control
Use only the supplied IR receiver or emitter to the switcher for IR control. With the DL-
PSMV62 switcher you are able to pass through IR control to and from the switcher using
the optional DL-HD70RX HDBaseT receiver. The IR EYE input on the DL-PSMV62 is only
designed for an IR receiver to support the included switcher IR remote.
Below is a diagram of IR usage when paired with the DL-HD70RX HDBaseT receiver.