USER MANUAL / DL-PSMV62
12
The contact closures changes the input of the DL-PSMV62. Use the following pin-out
configuration with any standard normally open, momentary switch.
These contact closure inputs are intended to be connected directly to relays or switches.
To activate simply short the associated terminal to the ground terminal.
Connect a control system to the DL-PSMV62 via RS232 for switcher control.
Connecting Control
RS232 Wiring
Connect the system controller RX signal
to TX on the DL-PSMV62 , then connect the
controllers TX signal to RX on the
DL-PSMV62.
RS232 Settings:
• 9600 baud
• 8 Data Bits
• 1 Stop Bit
• Parity = none
DL-PSMV62 RS232 Port
Connected RS232 Device pins
TX G RX
RX G TX
Contact Closures
RS232 Port Wiring
Содержание DL-PSMV62
Страница 4: ...USER MANUAL DL PSMV62 4 ...
