DL-SC41UP-BXTX Installation Guide
7
Installation Instructions
Install Table Pocket
A table cut out template has been provided in the package contents of the DL-SC41UP-BXTX that is printed to
the correct scale of the device dimensions.
Before cutting into the table top, confirm that the product you are installing is the DL-SC41UP-BXTX as the
provided template is only for this product. Cut out the ‘surface cut-out area’ from the template. Use the cut-out
to mark the position on the table top where the device will be installed. Always measure twice and compare to
product before making a cut into the table.
Install the table braces as shown below so table pocket switcher is mounted securely to conference table
Connect A/V Sources
Connect source devices to the HDMI, or USB-C inputs. When using HDMI cables for source inputs, use a High
Speed HDMI cable that is less than or equal to 5 meters in length for 4k60 signals and 8 meters for 1080p signals.
When connecting a source device to the USB-C input using a USB-C cable, be sure the USB-C cable is capable of
supporting video and is no longer than 2 meters (6.6’) in total length. The DL-SC41UP-BXTX USB-C input supports
ALT-DP mode for audio, video data and power charging. To ensure a laptop is compatible with the DL-SC41UP-
BXTX check the laptops capability of supporting this mode.
Note that not all laptops with USB-C port options will support video or more specifically ALT-DP video
mode.
Note:
By default the video inputs will switch automatically sensing HDMI / USB-C voltage, to change switching
mode to manual hold down the
INPUT
button for 3 seconds. The inputs can also be changed by web GUI settings
and the API, see page 15 and 25
Video Inputs
