DL-SC31U-BX Installation Guide
5
Top and Bottom Panels
Top Panel
1
3
4
5
6
7
8
2
1. INPUT LED’S AND SELECTOR
- A/V input source selector and corresponding LEDs
• INPUT
- Input selection button, hold down this button for 3 seconds to enter and exit
automatic switching mode
2. HDMI IN 1
- HDMI input 1
3. ETHERNET
- RJ45 connector for Ethernet pass through (to ETHERNET on bottom panel)
4. PC / HOST 1
- USB B Host port 1
5. USB
- Two USB A device ports for USB audio and video devices
6. Power
- USB A port for device charging only, provides up to 5 volts / 1 amp
7. USB-C
- USB-C input, supports A/V, data and power charging up to 40 watts
NOTE
: The DL-SC31U-BX USB-C input supports Display Port over Alternate mode for A/V and
USB data, to ensure a source is compatible with the DL-SC31U-BX check the sources capability
of supporting this mode. 40 watts of power is provided in USB-C connected device
8. DISPLAY POWER
- Press this button to turn
on
or
off
the connected TV display, the corresponding
LED
ON
or
OFF
will illuminate green confirming the display status. This function works with HDMI
/ CEC control as well as pre-loaded RS232 commands. RS232 commands can be configured in the
web GUI settings, see page 14
Содержание DIGITALINX DL-SC31U-BX
Страница 11: ...DL SC31U BX Installation Guide 11 A V Diagram ...
Страница 27: ...Device Dimensions ...