Libelium Waspmote Smart Parking v2, Техническое руководство

Страница: 42 / 155

Smart Devices App
Figure : “ Load con fi guration from node ” & “ Send con fi guration to node ” buttons
Smart Parking v2 shares most of the con fi guration fi elds with Smart Parking v1 . However, it is important to know
the purpose for each fi eld on the Smart Parking v2 con fi guration. To know more about each fi eld and how they
work, please refer to the chapter “ Smart Parking node ” .
5.3.4. Firmware upgrade
Inside this tab, users can select the fi rmware version to install in their devices.
Figure : Firmware update and factory reset section for Smart Parking v2
The list with all available fi rmwares is loaded when the program starts, but users can manually update it by clicking
on the “ Search new fi rmware updates ” button. Before installing the fi rmware, it is necessary to download it. This
process is very simple, just mark the check of the version you want to install from the list and click on “ Download
checked ” .
I mportant :
I t is mandatory to perform a con fi guration load from node using the button “ LOAD FROM NODE ” available in
“ PROGRAMMER ” tab before updating the fi rmware. This information load will check the current con fi guration
before updating the fi rmware.
- 41 - v7.5