-13-
v7.0
Working mode
3.2. Testing the device
Once the device has been registered properly in Loriot, it can be turned on and start working. Refer to the “User
interface” section to see how to power up the device and what to expect when the device is connected.
To see the packets sent to the back-end from the device, Loriot has developed the “Adeunis GPS” websocket
application. It parses the data and locates packets on a map.
Figure: Websocket applications menu
The application may take several minutes before showing packets and position. In order to show them, it is also
necessary for the module to be sending packets with location. Before start sending packets, it is recommended
to give a minute to the device so it gets GPS coverage. Once the device shows its position, pockets should start
being shown in the application.
Remember to select the Adeunis FTD registered unit in the application within the Adeunis GPS app.
Figure: Selected device menu