Installation Guide
Case components
Removable cover & air filter,
Spare 120 mm or 140 mm fans mount x 2
Multi-media
ports
Power switch
Patented tool-less
5.25" device mounting
2.5" HDD mount x 2
or 3.5" HDD mount x 1
120 mm fans x 3
with air filters
Power LED
HDD LED
Rubberized grommets
for liquid cooling tubing
Ventilation holes
on the PCI slots
Removable air filter
Removable HDD tray x 8
(3.5" HDD or 2.5" HDD)
120 mm fan
Spare 120 mm fans x 2
Metal casters
with brake
C50.V1000L.00E-1
Remove side panels
Motherboard installation
Remove front fan
Follow the arrow to remove
the front fans
ODD installation
1
2
PSU installation
Hardware list
Place the M/B onto the
copper bolt and fasten screws
to secure.
Pull side panels out to remove.
Place the PSU on the
stand, and push against the
rear panel.
Fasten screws to secure.
3.5" HDD installation
2.5" HDD installation
Remove the HDD tray
Remove 2 thumb screws.
Release the HDD tray.
Insert the 3.5" HDD, and fasten
thumb screws to secure.
Fasten the HDD to the cage
bottom with 4 screws.
Release brake
Follow the arrow to release the
brake
Loose the 4 screws to release the 5.25"
.
bezel
Push the ODD into the
5.25" rack, Close the bracket
to secure.
Thumb screws (41)
for 3.5" HDD
Screws (5)
for PSU mounting
USB 3.0 to USB 2.0
converter (1)
Thumb screws (4)
for ODD (Spare part)
Buzzer (1)
Cable tie (3)
for cable
Screws (37)
for 2.5” HDD
U
S
B
3-pin to 4-pin power-cord
converter (2) for fan
Clamp (2)
Anti-vibration rubber rings (8)
for 3.5" /2.5" HDD
S
(8)
for 2.5" HDD
crews M3
Screws (12)
for MB
5.25" bezel
