manualshive.com logo in svg

LI-COR LI-6400, Руководство пользователя, Страница: 267 / 846

Поделиться
Скачать
LI-COR LI-6400 Скачать руководство пользователя страница 267

Data Logging

AutoProgram Descriptions

Using the LI-6400

9-23

3

Auto match every __ obs (0 == none):

Enter 0 for no matching, 1 to match on every observation, 2 for every other
observation, etc. If and when automatic matching occurs, it comes out of the
normal log period. That is, if you are logging every 5 minutes, the period will
always be 5 minutes, regardless of whether it matched or not. 

ÒAveraging AutoLogÓ

This is similar to 

AutoLog

, except averages are logged, rather than instanta-

neous data.

■

■

■

■

Averaging AutoLog prompts for the following:

1

Log (and average) interval (secs):

How often is data to be logged. During this period, readings are made every
second, and what is logged will be the average of those readings.

2

Quit after (minutes):

The program will quit after this time period.

3

MATCH every Nth Log (0=never):

Enter 0 for no matching, 1 to match every observation, 2 for every other one,
etc.

Uses AuxN3

Averaging AutoLog uses AuxN3 for the number of samples in each observa-
tion. Therefore, to get this information included with your logged data, in-
clude system ID #-106 in your log list.

Note: Bug in Version 3.01

In OPEN 3.01, the final log period (or partial period) is not be recorded. This
is fixed in OPEN 3.2.

ÒBuffered AutoLogÓ

Buffered AutoLog

 allows data collection at a much faster rate than 

AutoLog

was designed to do. It accomplishes this by 

¥

Putting a low priority on screen updates

It will refresh every few seconds, or after a key press.

¥

Ignoring Strip Chart plotting if it is active

¥

Buffering A/D readings so no measurements are lost

This introduces a time restriction, since the buffer is limited (64K, or avail-
able memory). For example, if raw mV readings are being generated at 5 Hz,

Содержание LI-6400















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов