LI-COR LI-600, Инструкция по эксплуатации

Страница: 46 / 131

Section 5. Configurations
5-5
Data Labels
Figure 5-3 . The Data Labels screen.
In Data Labels , you can create labels using a number,
list, or barcode format. One label must be a barcode to
enable the barcode scanner. Each configuration can
have up to three labels.
Check Prompt On Log if you want to set a data label
after taking each measurement. If Prompt On Log is not
checked, you set data label values prior to taking a meas-
urement. Enabling Prompt On Log is useful when meas-
uring a variety of leaves that require individual labeling,
for example, when screening different genetic strains.
Leave Prompt On Log unchecked to add a label or bar-
code to a set of measurements before taking those meas-
urements. Each label selected prior to taking a
measurement will apply to subsequent measurements
until a new label is chosen.
Select New Data Label . Add a Data Label Name, then
select Number, List, or Barcode.