LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 43 / 90

For the LI-7500A/RS/DS or LI-7200/RS and file transfer utility
This procedure configures ports for the LI-7500A/RS or LI-7200/RS (with the
SmartFlux 2 System), or the SmartFlux 3 System (with the LI-7500DS). It also
opens a port for the file transfer utility, which makes it possible to copy data files
from the device. In ACEmanager™, under
Security > Port Forwarding
, click
Add
More
and enter the information.
Add port 7200 for the gas analyzerfile transfer utility are 7200 and 22.
If using the SmartFlux 2 System (not SmartFlux 3), open an additional port to
allow files to be copied from the LI-7550 USB drive.
Public Start Port Public End Port Protocol Host IP Private Start Port
7200 0 TCP 192.168.13.201 7200
7222 0 TCP 192.168.13.201 22
5222
1
0 TCP 192.168.13.200 22
Table 4-1 . Ports for the LI-7500A/RS or LI-7200/RS and SmartFlux 2 System, the
LI-7500DS and SmartFlux 2 System, and the file transfer utility used by both.
1
Used only to make it possible to copy files from the SmartFlux 2 System USB drive. Not required for the
SmartFlux 3 System.
Section 4. Configuring the RV50X
4-7 For the LI-7500A/RS/DS or LI-7200/RS and file transfer utility