8
INSTALLATION MANUAL
1.
Attach the support wheels (pos. 2) to the fixing frame (pos. 3). Use bolts M10 x 25, plus
10 washers
and M10 Nyloc nuts. Tighten the bolts.
Attention!
Depending on the height of the ATV and the location of the towing hook, choose securing holes that
match the height of the bolts. Take into account the fact that the fixing frame should run parallel to the bottom of
the ATV.
2.
Attach the snow blower (pos. 1) to the securing frame. When securing, use the pin (pos. 9) and splint
(pos. 13).
3.
Attach the internal pipe (pos. 4) to the securing frame. When securing, use the pin (pos. 10) and splint
(pos. 13).
Attention!
Depending on the length of the ATV, choose a length that is suitable for the pipe. Take into account
the fact that the securing frame on the snow blower is attached to the towing hook.
