LGMG AR45J, Руководство по обслуживанию

Страница: 18 / 33

LGMG North America Inc. Maintenance Manual
13
△
! Only when the engine is stationary can
the belt drive operation be carried out.
△
!
There is danger of burn. Be
cautious of high-temperature engine
components. Contact with them may
cause serious burn.
Belt Check
1)
Visually inspect whether all belt drives for
damage.
2) Replace damaged components.
3)
Reinstall the protector if necessary.
4) When it is a new belt, check whether the
position is correct. After running for 15
minutes, check the tension.
Replacement of belt
Figure 1-10
1) Loosen bolts (1,2,3) and nuts.
2)
Move the engine in direction B, until the belt
is lose.
3)
Remove the old belt, and install a mew one.
4) Move the engine in direction A until the
correct belt tension is reached.
5)
Check the belt tension.
6) Tighten the bolts and nuts.
Tightening torque
Screw 1 42 Nm
Screw 2 30 Nm
Screw 3 M8 30 Nm
Screw 3 M10 42 Nm
1.17 Regular Maintenance
Items with maintenance intervals of quarterly,
yearly, and two years must be completed by
qualified
personnel upon training in
maintenance of the machine in accordance with
procedures in the machine maintenance
manual.
For machines that are idle for more than three
months, a quarterly check must be performed
before they can be put into service.