LGC wireless InterReach Fusion SingleStar, Инструкция по установке и эксплуатации, Страница: 17 / 154

InterReach Fusion SingleStar Installation, Operation, and Reference Manual 2-1
D-620605-0-20 Rev A
CONFIDENTIAL
SECTION 2
InterReach Fusion SingleStar
System Description
InterReach Fusion SingleStar is a multi-band (frequencies) wireless networking sys-
tem designed to handle both wireless voice and data communications over licensed
frequencies. It provides high-quality, ubiquitous, seamless access to the wireless net-
work in smaller buildings.
Fusion SingleStar provides the same RF characteristics as InterReach Fusion, which
is designed for large public and private facilities such as campus environments, air-
ports, shopping malls, subways, convention centers, sports venues, and so on. Fusion
SingleStar uses microprocessors to enable key capabilities such as software-select-
able band settings, automatic gain control, ability to incrementally adjust down-
link/uplink gain, end-to-end alarming of all components and the associated cable
infrastructure, and a host of additional capabilities.
The Fusion SingleStar system supports major wireless standards and air interface pro-
tocols in use around the world, including:
• Frequencies: 800 MHz, 850 MHz, 900 MHz, 1800 MHz, 1900 MHz, 2100 MHz
• Voice Protocols: AMPS, TDMA, CDMA, GSM/EGSM
• Data Protocols: CDPD, EDGE, GPRS, WCDMA, CDMA2000, 1xRTT, EV-DO,
and Paging
The Fusion SingleStar system supports two configurable bands:
• Band 1 in 35 MHz and can be configured for 850 MHz, or 900 MHz.
• Band 2 in 75 MHz and can be configured for 1800 MHz, 1900 MHz, or 2100 MHz
Both bands support all protocols.
Fusion remote access units contain combinations of Band 1 and Band 2 frequenciesto
support various world areas, that is 850 MHz/1900MHz for North America or 900
MHz/2100 MHz for Europe and Asia. Refer to Table 4-1 on page 4-3 for a specific
list of these RAU frequency combinations.