35
EN
3
Close the dispenser drawer slowly.
4
Turn on the power, and then select the
Tub Clean
.
•
tcL
will be displayed on the display.
5
Press the
Start/Pause
button to start.
6
After the programme is complete, leave the
door open to dry the door opening, gasket, and
door glass.
CAUTION
•
Leave the door open to dry inside of the
appliance only if the children are supervised at
home.
Cleaning the Water Inlet
Filter
The water inlet filter collects lime or any sediment
that may be in water that is supplied to the
appliance. If the water is very hard or contains
traces of limescale, the filter on the water inlet may
clog regularly.
1
Turn off the water tap and unscrew the water
inlet hose.
2
Remove the Hot and Cold filters with tweezers
and clean them by using a medium bristle tooth
brush.
NOTE
•
Turn off the supply tap to the appliance if the
appliance is to be left for a certain period of time
(e.g. holiday), especially if there is no floor drain
(gully) in the immediate vicinity.
•
1E
will be displayed on the control panel when
the water is not entering the detergent drawer.
Cleaning the Drain Pump
Filter and Performing an
Emergency Water
Evacuation
The drain filter collects threads and small objects
that may have been accidently left in the laundry.
Check regularly that the filter is clean to ensure
smooth running of your appliance.
Allow the water to cool before cleaning the drain
pump filter. Open the door in an emergency or
perform an emergency water evacuation.
1
Unplug the appliance.
2
Open the cover cap and pull out the drain tube.
3
Remove the drain plug from the drain tube
first
a
, and then drain the water. Then slowly
unscrew the drain pump filter
b
to drain the
remaining water and then proceed to remove
any debris or objects from the filter.