background image

17

OPERATION

ENGLISH

Adding Fabric Softeners

•  Do not add fabric softener over the 

MAX

 line.

•  If the softener is concentrated, then it should be 

diluted.

•  Close the dispenser drawer gently.
•  Do not leave the fabric softener in the detergent 

drawer for more than 2 days. Fabric softener 

may harden.

•  Softener will automatically be added during the 

last rinse of the cycle.

•  Do not open the drawer when water is being 

supplied.

•  Solvents (benzene, etc.) must never be used.

NOTE

•  Pouring excessive fabric softener over the 

maximum fill line can cause it to dispense too 

early, which may stain clothes.

•  Do not pour fabric softener directly onto the 

laundry, doing so will cause staining on the 

clothes that will be difficult to remove.

Adding Liquid Bleaches

•  Before starting the appliance, pour the 

measured amount of bleach directly into the 

bleach dispenser 

a

. Avoid splashing or 

overfilling.

•  Mix powdered bleach with water to a liquid 

consistency and pour it into the bleach 

dispenser.

•  Check clothing care label for special instructions 

and separate the laundry to be bleached.

•  Dilute liquid chlorine bleach with water.
•  Measure the recommended amount of liquid 

bleach carefully according to instructions on the 

bottle.

CAUTION

•  Never pour undiluted liquid bleach directly onto 

laundry or into the wash basket. This may cause 

change of colour or damage to the laundry.

•  Do not pour powdered bleach into the bleach 

dispenser. Powdered bleach may harden, so it 

will block the bleach dispenser.

Содержание WTG9020B





































Отзывы: