12
ENGLISH
A
B
CAUTION
•
Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
•
Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
•
If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorised LG wall mount and
contact the local dealer or qualified personnel.
•
Do not over tighten the screws as this may cause damage to the TV
and void your warranty.
•
Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the manufacturer’s warranty.
NOTE
•
Use the screws that are listed on the VESA standard screw
specifications.
•
The wall mount kit includes an installation manual and necessary
parts.
•
The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
•
The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
•
For more information, refer to the manual supplied with the wall
mount.
•
Depending on the shape of the stand, use a flat tool to remove
the stand cover as illustrated below. (e.g., a flat screwdriver) (Only
when the item of the following form is provided)
Flat tool
Flat tool
Connections (notifications)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
•
The external device connection may differ from the model.
•
Connect external devices to the TV regardless of the order of the
TV port.
•
If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
•
Refer to the external equipment’s manual for operating
instructions.
•
If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
•
In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
•
In PC mode, some resolution settings may not work properly
depending on the graphics card.
•
Only a USB storage device is recognizable.
•
If ULTRA HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC’s
performance. (Depending on model)
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•
Use a signal splitter to use more than 2 TVs.
•
If the image quality is poor, install a signal amplifier properly to
improve the image quality.
•
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
•
An antenna cable and converter are not supplied.
•
Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
•
For a location that is not supported with ULTRA HD broadcasting,
this TV cannot receive ULTRA HD broadcasts directly. This TV cannot
receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because
the related standards have not been confirmed. (Depending on
model)
