background image

19

INSTALLATION MENU

ENGLISH

NETWORK

Use the  

 button to select the 

NETWORK

.

MAC Address

 

-

Displays the MAC address (not customizable).

Network Setting

One-click network connection

 

-

Connects easily to a wired/wireless network.

 

-

Network Connection to connect to an available network automatically. Follow the prompts on the TV.

To connect to a network through Set Expert

 

-

 For use in special circumstances such as in offices (in cases where a static IP is used).

Select a network connection, either Wired or Wireless.

When connecting via Wired, Configures the IP settings of the TV set. You can set the IP address, subnet mask, gateway and DNS server.

When connecting via Wi-Fi, use the one of the following network connection methods. 

AP List

Connects to the network selected from the AP List.

Enter the SSID

Connects to the wireless AP typed in.

WPS-PBC

Connects easily when the button of a wireless AP supporting PBC is pressed.

WPS-PIN

Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to the AP website.

Ad-hoc

Connects to a network via a wireless-enabled PC or mobile phone.

 

Содержание UW760H Series






































Отзывы: