1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OWNER’S MANUAL
Bluetooth
®
LG Stereo Headset
TONE-FP9A
TONE-FP9WA
TONE-FP9EA
Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play
App Store
www.lg.com
NOTE:
For the proper performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modifications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 AU
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks most ambient sounds.
So, you can use the function to listen to music or watch a video with
minimal noise interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specifications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair
3. Wearing Earbuds
NOTE:
Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable/USB-C™ to AUX cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI
0/
~1m
Turn on the
Bluetooth
function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires configuring
Bluetooth
and location information
settings of the mobile device.)
If the pop-up does not appear, select
[LG-TONE-FP9]
from the
Bluetooth
menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION:
In the list of
Bluetooth
connected devices, LG-TONE-FP9_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the
Bluetooth
menu of Connected Device
Settings.
NOTE:
To connect with another device, perform the above procedure again.
Bluetooth
name of the product is “LG-TONE-FP9”.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they fit comfortably in your ears.
NOTE:
You can use ear gels that fit your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
7. UVnano
8. Charging
10. Checking the Battery Status
-(
Function
Description
Play / Pause
:
Touch the left or right earbud once.
Adjusting
the Volume
:
Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next
:
Touch the left or right earbud three times.
NOTE:
You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE:
The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION:
Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE:
The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red
20% or lower
Charging
Yellow
20% - 80%
-
Green
80% or higher
Fully charged
NOTE:
When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud
to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can configure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*
ANC is an acronym for Active Noise Cancellation.
!
CAUTION:
When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
5. Mobile Calling Functions
Function
Status
Description
Answering Calls Ringing
Touch the left or right earbud
once.
Ending Calls
Talking
Touch the left or right earbud
twice.
Making Calls
Idle
If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving Calls
while on the
Phone
Talking
If you
touch the left or right earbud
once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can finish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting Calls
Ringing
Touch and hold the left or right earbud.
9. Plug and Wireless Mode (External Device Connection Mode)
You can connect the charging case to a device such as an airplane stereo
system, treadmill, cassette player, radio, and TV to listen with the earbuds.
1 Push the Plug and Wireless Mode switch on the charging case to
the right to activate the Plug and Wireless Mode. The battery status
indicator flashes in green.
2 Open the cover of the charging case to connect the charging case to the
earbuds. Once the connection is established, the battery status indicator
turns on in green for 3 seconds and turns off.
3 Connect the USB Type C™ side of the USB-C™ to AUX cable to the
charging case. (The USB-C™ to AUX cable does not support the
charging function.)
4 Connect the AUX side of the USB-C™ to AUX cable to a device that
you want.
NOTE:
Deactivate the Plug and Wireless Mode to reconnect the earbuds
to the
Bluetooth
device that was previously connected.
If the Plug and Wireless Mode is turned on, the earbuds and the LG TONE Free
app are disconnected.
The Plug and Wireless mode does not support the call function.
The Plug and Wireless mode may not be compatible with some devices.
In airplane models in which the AUX terminal is divided into left and
right channels, an adapter (separately sold) may be necessary.
If you use the Plug and Wireless mode for a long duration, the battery
of the earbuds (including the charging case) may drain faster than
when physically connected to a smartphone.
Plug and Wireless Mode Switch
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
USB-C™ to AUX
cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
