LG TB-H488RSS5, Руководство по обслуживанию, Страница: 35 / 42

Cycle Troubleshooting Guide
Trouble analysis
1. Check temperature difference between intake and discharge air and operating current.
Temp. Difference
Temp. difference : approx. 0°C
Current : less than 80% of
rated current
Temp. difference : approx. 8°C
Current : less than 80% of
rated current
Temp. difference : less than 8°C
Current : over the rated
current
Temp. difference : over 8°C
Operating Current
After all amount of refrigerant leaked
out, check refrigeration cycle
Refrigerant leakage
Clog of refrigeration cycle
Defective compressor
Excessive amount of refrigerant
Normal
Notice :
Temperature difference between intake and discharge air depends on room air humidity. When the room air
humidity is relatively higher, temperature difference is smaller. When the room air humidity is relatively lower tem-
perature difference is larger.
2. Check temperature and pressure of refrigeration cycle.
Notice :
1. The suction pressure is usually 4.5~6.0 kg/cm
2 G at normal condition.
2. The temperature can be measured by attaching the thermometer to the low pressure tubing and wrap it with
putty.
Suction pressure Temperature
n o i t p i r c s e D e l b u o r T f o e s u a C h t i w d e r a p m o C ( h t i w d e r a p m o C (
the normal value) the normal value)
Defective compressor Current is low
Defective 4-way reverse valve
Excessive amount of High pressure does not quickly
f o g n i n n i g e b e h t t a e s i r t n a r e g i r f e r l a m r o N
operation
Insufficient amount of Current is low
Lower Higher refrigerant (Leakage)
w o l s i t n e r r u C g n i g g o l C
High
Higher
–35–