38
EN
Symptoms
Reason
Solution
Water level is too high due to
a faulty water valve.
•
Close the water taps, unplug the washing
machine, and call for service.
The water level sensor is not
working correctly.
•
Close the water taps, unplug the washing
machine, and call for service.
A motor error has occurred.
•
Allow the washing machine to stand for 30
minutes and then restart the cycle. If the error
code is not released, call for service.
Clutch error.
•
Unplug the washing machine and call for
service.
Tub Clean Alarm.
•
Run the
Tub Clean
programme.
Sensor for cloth-sensing is
defective.
•
Manually redistribute the load if articles have
become tangled.
Motor’s revolution is too low.
•
Unplug the washing machine and wait 60
seconds. Reconnect power and try again.
•
Call for service.
Contact-point of Connector is
defective.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
•
To deactivate, press and hold the
Beeper
and
Rinse
buttons simultaneously for 3 seconds.
Содержание T2518VSAB
Страница 2: ......