background image

30

TROUBLESHOOTING

EN

Noises

E3

CLOTHES SENSING 

ERROR

Sensor for clothes-sensing is defective.

•  Manually redistribute the laundry if laundry have become tangled.

Motor’s revolution is too low.
Contact-point of Connector is defective.

•  Unplug the appliance and wait 60 seconds. Reconnect power and try 

again.

CL

CHILD LOCK FUNCTION

CL

 is not an error. This prevents children from changing cycles or 

operating the appliance.

•  Turn off the 

Child Lock

 function in the control panel.

Symptoms

Possible Cause & Solution

Rattling and clanking 

noise

Foreign objects, such as keys, coins, or safety pins may be in the drum.

•  Stop the appliance, check the drum for foreign objects. If noise continues 

after the appliance is restarted, call for service.

Thumping sound

Heavy laundry may produce a thumping sound. This is usually normal.

•  If the sound continues, the appliance is probably out of balance. Stop and 

redistribute the laundry.

The laundry may be out of balance.

•  Pause the cycle and redistribute the laundry after the door unlocks.

Vibrating noise

Packaging materials are not removed.

•  Remove packing materials.

The laundry may be unevenly distributed in the drum.

•  Pause the cycle and redistribute the laundry after the door unlocks.

Not all levelling feet are resting firmly and evenly on the floor.

•  See the section 

Levelling the Appliance

 to adjust and level the feet.

Floor is not rigid enough.

•  Check if the floor is solid and does not flex. See the section 

Installation 

Place Requirements

 to select the proper location.

Symptoms

Possible Cause & Solution

Содержание T2107VS2W





































Отзывы: