19
The
DISPLAY
will count down from 30 seconds. When it
reaches 0 it will emit an audible beep until the door is
opened or the STOP/CLEAR button is pressed. Open the oven door
and test the temperature of the water. If your oven is operating the
water should be warm.
Be careful when removing the container it
may be hot.
YOUR OVEN IS NOW INSTALLED
Fill a
microwave safe container
with 300 ml (1/2 pint)
of water. Place on the rack on the oven bottom surface
and close the oven door. If you have any doubts about what
type of container to use please refer to page 60.
Open your oven door by pulling the
DOOR HANDLE
.
Place the
RACK
inside the oven.
Plug your oven into a standard household socket. Make
sure your oven is the only appliance connected to the
socket.
If your oven does not operate properly, unplug it
from the electrical socket and then plug it back in.
Press the
STOP/CLEAR( )
button, and
press the
ENTER/START/Q-START( )
button one time to set 30 seconds of cooking time.
