LG STB-5500 Скачать руководство пользователя страница 91

Страница: 91 / 97

206-4310

Reference: STB Installer Remote

If you are using an LG display panel, the LG remote provided with the

display panel should be sufficient. However, if you are using a commercial

non-LG display panel or if you intend to use multiple STBs/displays in a

single room installation environment, an LG Installer Remote dedicated

to STB control (see example at right) is available for purchase.
The STB Installer Remote illustrated on the right shows typical remote

control functions and is provided for reference only.
For additional information and/or to purchase an STB Installer Remote,

please contact your LG service representative.

Installer Remote Functionality

The STB Installer Remote provides the same standard configuration

functionality as a typical LG Installer Remote, along with multi-code

capability. See also “Installer Remote Control Typical Key Functions”

information on the previous page.

Set the STB Installer Remote IR Code Scheme

(Multi-code Feature)

This section describes how to set the STB Installer Remote to send

unique IR codes based on “bed number” in a multi-STB/display single

room installation. The remote may be set from Bed 1 to Bed 9.

Note:

The STB will always respond to the standard LG Installer Remote

IR code scheme, i.e., you can always use an LG TV Installer Remote with

the STB, regardless of its multi-code IR setting.
The following procedure describes how to set the bed number in the STB

Installer Menu and in the STB Installer Remote.
1. Installer Menu item 020 FEATURE LEVEL determines the additional IR

code scheme to which the STB will respond. Access the STB Installer

Menu, and set item 020 to the desired value

(16 – 24).

The STB Installer Remote must now be set to match the FEATURE

LEVEL setting. That is, if item 020 is set to 17 for Bed 2, the STB

Installer Remote must also be set to multi-code Bed 2.

Note:

By default, the STB Installer Remote IR code scheme is the

same as the standard LG TV Installer Remote IR code scheme.

2. On the STB Installer Remote, press and hold

along with the

desired (bed) number key (1 – 9).

The TV LED at the top left of the remote will light for three seconds

and then turn OFF.

3. Once the TV LED turns OFF, release both keys on the remote.
4. Verify that the STB Installer Remote now controls the STB/display,

based on your settings.

Note:

If necessary, you can restore the STB Installer Remote IR code

scheme to the standard LG Installer Remote IR code scheme by pressing

and holding

on the remote along with the “0” key.

VOL

TIMER

INPUT

SAP

DVD

MUTE

FLASHBK

VD/

EXIT

GUIDE

INFO

PORTAL

Содержание STB-5500


































































































Результаты поиска

Содержание STB-5500

Отзывы:

Бренды по названию

Популярные бренды

LG STB-5500, Руководство по настройке коммерческого режима

Результаты поиска

Содержание STB-5500

Отзывы:

Бренды по названию

Популярные бренды