26
206-4310
EZ-Manager Wizard (Cont.)
1. Insert the USB memory device with
the appropriate file(s) into
either of the STB’s USB ports.
2. Use the arrow keys on the Installer Remote to select
USB CONFIGURATION
, and then press
OK
.
You will be redirected to the STB Manager / USB download options.
Select the file(s) to download, and then select UPDATE below.
Insert Background Image(s)
None
Update STB Software
STB_CPU_SW.epk
Update PTC Software
STB_PTC_SW.txt
Import Clone File
STB_IM.tlx
<
>
X
USB DEVICE
STB MANAGER
Ez Download
USB 1:
Device Name
Ez Download
Insert Background Image(s)
Update STB Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Image1.jpg Image2.jpg
Image3.jpg
Image4.jpg Image5.jpg
Image6.jpg
Image7.jpg Image8.jpg
Image9.jpg
Note:
You can select the
X
button at the top right corner of the screen and press
OK
on the
Installer Remote at any time to return to the EZ-Manager Wizard.
Note:
Ez Download is always selected by default when you initially access the STB Manager.
Also note that Diagnostics is for service use only.
3. If more than one USB memory device is currently connected to the STB, be sure to select the
USB device that contains the file(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the
USB DEVICE
button at the top right of the screen and
press
OK
. Then, use the Up/Down arrow keys to select the appropriate USB device from the
pop-up list of USB devices displayed at the top of the screen.
4. Select the appropriate option from the STB Manager, and initiate the desired download(s).
Update progress will be shown on the screen. Do NOT remove the USB device while updates are
in progress. When the update process is complete, the STB will reboot. Upon restart, depending
on the type of update(s) completed, either the EZ-Manager STB Configuration Options screen
will be redisplayed (software and/or image updates only) or the STB will tune according to the
Start Channel setting in the Installer Menu (STB configured with Clone/Configuration file).
Note:
If the STB Configuration Options screen is redisplayed (software and/or image
updates only), you can either proceed with configuration via the EZ-Manager Wizard or exit
the EZ-Manager Wizard, as required.
Note:
If you updated the STB configuration with a Clone/Configuration file that included a
change to Installer Menu item 105 VID OUT FORMAT, when the reboot is complete, you will be
prompted to confirm the new video output resolution
. See item 105 description on page 39 for
further information.
5. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the STB.
