24
206-4256
Complete
The TV will reboot in 2 second(s).
Installed Components
Maintenance File :
STB-2000-UA00001.TLX
Software File (CPU) :
STB-2000_v3.08.00_usb.epk
Software File (PTC) :
STB-2000_v1.00.020.txt
USB LG Smart Install Utility
Integrated USB Downloading
Select the configuration file(s) to download, and then select ‘Next’.
STB-2000-UA00001.TLX
USB LG Smart Install Utility
Next
Previous
STB-2000_v3.08.00_usb.epk
STB-2000_v1.00.020.txt
Downloading Data...
Warning - Do not remove the USB device during this process
Maintenance File
File Name :
STB-2000-UA00001.TLX
USB LG Smart Install Utility
Complete
Software File (PTC)
File Name :
STB-2000_v1.00.020.txt
Ready
Software File (CPU)
File Name :
STB-2000_v3.08.00_usb.epk
Ready
LG Smart Install Utility (Cont.)
(Continued from previous page)
4. The Integrated USB Downloading screen contains a listing of
the files stored in the LGSMARTINSTALL folder on the USB
device.
To select or de-select a file, respectively, use the Up/Down
arrows on the Installer Remote to highlight the filename, and
press
OK
to add or remove the checkmark at the left of the
filename.
Note:
The utility will only allow you to select one of each file
type for downloading. For example, if there are two TLX files
in the LGSMARTINSTALL folder, you can only select one or
the other of those two files. By default, the first instance of
each file type listed on the screen is selected.
Note:
Use the arrow keys on the Installer Remote to select
Previous
and press
OK
, as necessary, to exit the LG Smart
Install utility. If you accessed the utility via the EZ-Manager
Wizard, you will be returned to the last screen on display
before you inserted the USB device. If you accessed the
utility via the STB menus, you will be returned to TV viewing.
5. When you are ready to continue, use the arrow keys on the
Installer Remote to select
Next
, and then press
OK
.
Download progress will be shown in a new screen. Do
NOT remove the USB device until downloading is complete.
When the download is complete, an overview of the results
will briefly be displayed in a “Complete” screen and then you
will either be returned to TV viewing or the STB will reboot
(the latter if software has just been downloaded).
6. Remove the USB memory device, and verify that the
appropriate configuration is resident on the STB.
Note:
(TLX configuration only) When configuration is complete,
the STB tunes according to the Start Channel setting in the
Installer Menu. If a Start Channel is specified, the STB will tune
to that channel, though in the case of FTG Mode configuration,
a channel banner will only be displayed if the Start Channel is
included in the FTG Channel Map. Otherwise, the STB will
either return to the last channel tuned (STB in Pass-through
Mode) or tune to the first channel in the FTG Channel Map
(STB in FTG Mode).
