LG SS-H106TEA1 AOSANMC Скачать руководство пользователя страница 4

4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Do not install the air conditioner on an unstable surface or where there may be a danger of it

falling. It may result in death, serious injury, or product failure.

• Use inflammable gas (nitrogen) to inspect leak and to purge air, using compressed air or flam-

mable gas may cause fire or explosion.

• Please keep the protective film of reset switch.  It is used to protect the PCB from ESD dam-

age.

Operation

• Do not let the air conditioner run for a long time when the humidity is very high or when a door or

window has been left open. Failure to do so may result in product failure.

• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-

ure to do so may result in fire, electric shock, or product failure.

• Do not place any objects on the power cord. It may result in electric shock or product failure.

• Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in

fire or electric shock.

• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or

product failure.

• Do not place a heater or other heating appliances near the power cable. It may result in fire, electric

shock, or product failure.

• Do not allow water to run into the air conditioner. It may result in explosion or fire.

• Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner.

It may result in explosion or fire.

• Do not use the air conditioner for an extended period of time in a small place without ventilation.

Ventilate the place regularly. Failure to do so may result in explosion or fire.

• When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so

may result in explosion or fire.

• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to

do so may result in explosion or fire.

• Stop operating and close the window in strom or hurricane. If possible remove the product from the

window before hurricane arrives

• Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in elec-

tric shock or product failure.

• Contact an authorized service center when the air conditioner is submerged into water due to flood-

ing. Failure to do so may result in explosion or fire.

• Be cautious water could not enter the product.

• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater

are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.

• Turn the main power off and unplug the power plug when you clean or repair the air conditioner.

Failure to do so may result in death, serious injury, or product failure.

• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure

to do so may result in product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

WARNING

• For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent

that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire,
or electronic shock. 

!

Содержание SS-H106TEA1 AOSANMC




















Отзывы: