27
USING THE PROJECTOR
Additional Options
Adjusting Aspect Ratio
You can adjust the aspect ratio of the
picture by pressing
RATIO
while
watching with the projector.
NOTE
y
Available options may vary depend-
ing on the input signal.
y
You can also use the
Q.MENU
or
MENU
button.
-
Full
: Displays the picture in full
screen regardless of the aspect
ratio.
-
16:9
: Resizes the picture with a 16:9
ratio.
-
Just Scan
: Displays the picture in
the original size without cutting off
the edges.
Just Scan
NOTE
y
For Just Scan, you may see image
noises at the edges of the screen.
-
Set By Program :
Displays the pic-
ture in the same aspect ratio as the
original image.
Set By Program
-
4:3
: Resizes the picture with a 4:3
ratio.
-
Zoom
: Enlarges an image to fit the
screen width. The top and bottom of
the image may be truncated.
y
Press the or button to zoom in
or out of the image.
y
Press the or button to move
the image.
-
Cinema Zoom 1
: Resizes the
picture with a cinemascope ratio of
2.35:1. It ranges from 1 to 16.
y
Press the or button to zoom in
or out of the image.
y
Press the or button to move
the image.
NOTE
y
If you enlarge or reduce the picture,
it may be distorted.
