LG RN1329A1S страница 46 Скачать руководство пользователя

Страница: 46 / 52

MAINTENANCE

MAINTENANCE

■

Regular cleaning

WARNING

To reduce the risk of fire, electric shock, or injury

to persons when using this appliance, follow basic

precautions, including the following:

• Unplug the dryer before cleaning to avoid the risk of

electric shock.

Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

• Never use harsh chemicals, abrasive cleaners or solvents

to clean the dryer.

They will damage the finish.

Cleaning the Exterior

Proper care of your dryer can extend its life.

The outside of the machine can be cleaned with warm water

and a mild, nonabrasive household detergent.

Immediately wipe off any spills with a soft, damp cloth.

Cleaning the Interior

Wipe around the door opening and seal with a soft, damp cloth to

prevent lint and dust buildup that could damage the door seal.

Clean the window with a soft cloth dampened with warm water and

a mild, nonabrasive household detergent; then wipe dry.

The stainless steel drum can be cleaned with a conventional stainless

steel cleaner, used according to the manufacturer’s specifications.

Never use steel wool or abrasive cleansers; they can scratch or

damage the surface.

Cleaning Around and Under the dryer

Vacuum lint and dust from around the dryer and underneath

it regularly. Vent ductwork should be checked for lint buildup

and cleaned at least once per year. If any noticeable reduction

in airflow or drying performance occurs, immediately check

ductwork for obstructions and blockages.

Maintaining ductwork

Vent ductwork should be checked for lint buildup and cleaned at

least once per year. If any noticeable reduction in airflow or drying

performance occurs, immediately check ductwork for obstructions

and blockages. Contact a qualified technician or service provider.

Cleaning the Lint Filter

Always clean the lint filter after every cycle.

To clean, open the dryer door and pull the lint filter

straight up.Then:
1. Roll any lint off the filter with your fingers, or

2. Vacuum the lint filter, or

3. If the lint filter has become very dirty or clogged with

fabric softener, wash the lint filter in warm, soapy

water and allow to dry thoroughly before reinstalling.

Do not use methylated spirits, solvents, or similar products. Never

use steel wool or abrasive cleansers; they can damage the surface.

NOTE

NEVER operate the dryer without the lint filter in place.

NEVER operate the dryer with a wet lint filter. Recommended

frequency of periodic servicing is once a year

NOTE

Distributer & Service

JLA

Meadowcroft Lane, Ripponden, West Yorkshire,

HX6 4AJ, United Kingdom

T + 44 (0)1422 822282 www.jla.com

LG Electronics Service Europe B.V.

Krijgsman1, 1186 DM Amstelveen, the Netherlands

T:31-20-456-3132

JLA is the distributer & service in UK

Producer

LG Electronics Inc.

76, Seongsan-dong, Changwon-city, Gyeongnam 641-

713, Korea

T. 82-55-269-3723 www.lg.com

NOTE

Distributer & Service

JLA

Meadowcroft Lane, Ripponden, West Yorkshire,

HX6 4AJ, United Kingdom

T : 44 (0)1422 822282 www.jla.com

JLA is the distributer & service in UK

Maglione

Via Vittorio Emanuele II, 6/8 - 25030 Roncadelle (BS)

T : 030-25-85-077 (4 linee r.a.)

Maglione is the distributer & service in ITALY

LG Electronics Service Europe B.V.

Krijgsman1, 1186 DM Amstelveen, the Netherlands

T : 31-20-456-3132

BIJELI SVIJET d.o.o.

Kranjceviceva 50, Zagreb, Croatia

Tel. +385.1.3091.870 www..bijelisvijet.hr

Producer

LG Electronics Inc.

76, Seongsan-dong, Changwon-city, Gyeongnam 641-

713, Korea

T : 82-55-269-3723 www.lg.com

NOTE

Lint Filter

MFL62512875_140916.indd 46

2014.9.16 10:24:32 AM

Содержание RN1329A1S





















































Результаты поиска

Содержание RN1329A1S

Отзывы:

Похожие инструкции для RN1329A1S

Бренды по названию

Популярные бренды

LG RN1329A1S, Руководство пользователя

Результаты поиска

Содержание RN1329A1S

Отзывы:

Похожие инструкции для RN1329A1S

Бренды по названию

Популярные бренды