Signal Strength
If you’re inside a building, being near a window may
give you better reception. You can see the strength of
your signal by the signal indicator (
) on your
phone’s display screen.
About the antenna
Your phone has a built-in
antenna. As with any other
radio transmitting device,
do not touch the antenna
unnecessarily when the
phone is switched on.
Contact with the antenna
affects call quality and may cause the phone to
operate at a higher power level than needed.
Not touching the antenna during a call optimizes the
antenna performance and the talk-time of your phone.
Normal position: Hold the phone as you would any
other telephone.
Quick Adjust
Adjusting Vibrate Mode
Use Vibrate Mode in a public place.
1) In standby mode, activate Vibrate Mode quickly by
pressing the
. (for 2 seconds) instead of using
the Menu function.
• When Vibrate Mode is set, Key tone does not
sound.
N
No
otte
e
To cancel Vibrate Mode, press
for 2 seconds.
Select Profiles
1) In standby mode, press
.
2) Select one of four Profiles Vibrate Only, Silent,
General and Outdoor with
.
3) Press
or Soft Key 1
Set
.
Adjusting Speaker Mode On
During a call, to activate or cancel Speaker quickly,
press .
1) In standby mode, activate Speaker Mode by
pressing the
for 2 seconds.
16
RD6250
Basic Functions
RD6250_Eng_OM-final.qxd 1/27/07 9:00 PM Page 16
