LG-RD2030
59
LG-RD2030
58
Data Baud
(
Menu
)
This setting enables the subscriber terminal to set
the baud rate.
G
Data Baud set 19,200/115,200/230,400
By default it is set to 115,200. If you change this
setting on the phone ensure that the PC baud
rates are changed to match accordingly.
Note
The wireless phone will work with the PC / PDA
properly only when the serial port settings on both
the PC match with the baud rates set on the phone.
2) Key Guard
(
Menu
)
Allows you to protect the keypad of your phone from
accidental dialing. When this function is enabled, no
call can be made and the access to Menu is locked.
When the keypad id locked, it is possible to answer a
call normally.
G
Select Enable or Disable and press Soft Key 1
Ok.
To enable quickly : Press the key
for two
seconds.
To disable quickly : Repeat the procedure.
3) Clock
(
Menu
)
G
Select Show or Hide and press Soft Key 1 Ok.
Phone (
Menu
)
1. Press Soft Key 1 Menu.
2. Press
SETTINGS.
3. Press
Phone.
1) Data Settings
(
Menu
)
Data/Fax
(
Menu
)
In Data/ Fax setting, you can use your phone as
a wireless modem to avail high speed data
services such as browsing Internet and other
dial-up networking functions. The wireless phone
supports a maximum data rate of 153.6 kbps on
the network side. The speed of your connection
depends upon network congestion, signal
strength, and other variables.
G
Data In: This setting enables a subscriber to
receive data calls.
G
Fax In: Fax Services are currently not support-
ed on Reliance Network.
Note
You need to purchase the Data Kit in order to be
able to use the phone as modem. The data kit
includes a suitable cable that has RS-232 interface
for connecting the phone to the PC. Please contact
Reliance for further information.
