LG PX8700 Скачать руководство пользователя страница 115

Страница: 115 / 159

PX8700

LG Electronics Inc.

- 91 -

General Terms

Abbreviated Alert. An abbreviated alert is used to remind the mobile station user that previously selected

alternative routing features are still active.

AC.

See Authentication Center.

Access Attempt.

A sequence of one or more access probe sequences on the Access Channel containing the

same message. See also Access Probe and Access Probe Sequence.

Access Channel

. A Reserve CDMA Channel used by mobile stations for communicating to the base station.

The Access Channel is used for short signaling message exchanges such as call origination’s, responses to pages,

and registrations. The Access Channel is a slotted random access channel.

Access Channel Message

. The information part of an access probe consisting of the message body, length field,

and CRC.

Access Channel Message Capsule.

An Access Channel message plus the padding.

Access Channel Preamble.

The preamble of an access probe consisting of a sequence of all-zero frames that is

sent at the 4800bps rate.

Access Channel Request Message.

An Access Channel message that is autonomously generated by the mobile

station. See also Access Channel Response Message.

Access Channel Response Message.

A message on the Access Channel generated to reply to a message

received from the base station.

Access Channel Slot.

The assigned time interval for an access probe. An Access Channel slot consists of an

integer number of frames. The transmission of an access probe is performed within the boundaries of an Access

Channel slot.

Access Probe.

One Access Channel transmission consisting of a preamble and a message. The transmission is

an integer number of frames in length and transmits one Access Channel message. See also Access Probe

Sequence and Access Attempt.

Access Probe Sequence.

A sequence of one or more access probes on the Access Channel. The same Access

Channel message is transmitted in every access probe of an access attempt. See also Access Probe and Access

Attempt.

Acknowledgement.

A Layer 2 response by the mobile station or the base station confirming that a signaling

message was received correctly.

Action Time.

The time at which the action implied by a message should take effect.

Active Set.

The set of pilots associated with the CDMA Channels containing Forward Traffic Channels assigned

to a particular mobile station.

Aging.

A mechanism through which the mobile station maintains in its Neighbor Set the pilots that have been

recently sent to it from the base station and the pilots whose handoff drop timers have recently expired.

A-key.

A secret, 64-bit pattern stored in the mobile station. It is used to generate update the mobile station’s

Shared Secret Data. The A-key is used in the mobile station authentication process.

Analog Access Channel

. An analog control channel used by a mobile station to access a system to obtain

CHAPTER 6. Glossary

Содержание PX8700
































































































































































Результаты поиска

Содержание PX8700

Отзывы:

LG PX8700, Руководство по обслуживанию, Страница: 115 / 159

Результаты поиска

Содержание PX8700

Отзывы: