29
206-4270
PCS200S Configuration Options (Cont.)
Monitor the System
This option enables you to view dynamic system streaming data.
1. Log in to the PCS200S as described on page 21.
2. At the
Command >
prompt, type
monitor
and press
Enter
to display the current system
data. See example below.
3. The system data will refresh every second. When you are finished monitoring streaming
data, press
Enter
to stop the system monitor and return to the
Command >
prompt.
Example: System Monitor Display
SYSTEM MONITOR
Date:
2015-01-26 16:44:27
SN: 401-12080008
Version: 1.1
Output: RF_QAM256_6M
Pg/RF: 2
Bitrates (Mbps):
------+--------------------+---------+-------+------+----------
Slot | Content
| Secs | Mbit | Pct | RF Out
------+--------------------+---------+-------+------+----------
1 | GEM Data
|
685 | 8.9
|
- | 75-1
2 | Video1.ts
|
100 | 5.3 |
86 | 75-47 :)
4 | Video2.ts
|
6 | 5.1 |
1 | 76-1 :)
5 | Video3.trp
|
205 | 4.6 |
78 | 76-2 :)
7 | Video4.ts
|
40 | 4.2 |
12 | 77-1 :)
8 | Video5.trp
|
172 | 2.7 |
66 | 77-2 :)
10 | Video6.ts
|
12 | 3.5 |
3 | 78-1 :)
11 |
|
- | 0.0 |
- | 78-2
13 | Video7.ts
|
171 | 4.7 |
94 | 79-1 :)
14 |
|
- | 0.0 |
- | 79-2
16 |
|
- | 0.0 |
- | 80-1
17 |
|
- | 0.0 |
- | 80-2
19 |
|
- | 0.0 |
- | 81-1
20 |
|
- | 0.0 |
- | 81-2
22 |
|
- | 0.0 |
- | 82-1
23 |
|
- | 0.0 |
- | 82-2
------+--------------------+---------+-------+------+----------
Press <Enter> key to exit the monitor
Note:
This example shows data for a system that is configured for QAM-B RF output (the first
channel is reserved for GEM/site data). If a solid state drive is installed in the server’s SSD
slot, the system monitor display shows streaming data for each of the active video programs.
