20
206-4341
Basic Settings Wizard (Cont.)
(Continued from previous page)
Tuning progress will be initiated/shown in a new Channel Tuning screen. The scan typically
takes a few minutes. When the channel scan is complete, the TV will launch the IP Environment
Menu. See additional information below.
• If you would like to continue with the TV setup without running Channel Tuning, select the
DONE
button at the bottom of the screen, and press
OK
. The TV will launch the IP Environment
Menu. See additional information below.
X
This wizard will continue automatically in 10 seconds.
03
BACK
DONE
CHANNEL TUNING
CHANNEL TUNING
If you intend to run Channel Tuning, first select the tuning band you would like to use.
Select the tuning band you would like to use
Cable Standard
^
As indicated above, the IP Environment Menu is always launched after the Basic Settings Wizard
is complete (and once Channel Tuning is finished, if applicable). The IP Environment Menu launches
with the Network Menu options on display (default IP Environment Menu launch scenario). See
“IP Environment Setup” on pages 61 to 65 for further information on the options available in the IP
Environment Menu.
