25
ENGLISH
Log In to the PCS500R and Access the Main Menu
Note
: The PCS500R must be connected to an IP network for SSH client access. For direct access to
the PCS500R Service Port, use the FTDI TTL-USB cable (P/N TTL-232R-5V-AJ). See also “Network and
Communication Setup” above for further information.
1 Establish communication with the PCS500R using an SSH client or via a direct connection to the PCS500R
Service Port.
Once communication is established, you should see a login prompt. (If the login prompt is not automatically
displayed, press
to refresh the screen.)
2 At the
prompt, type
and press
.
3 At the
prompt, type the admin password and press
.
4 At the
prompt, either:
•
Press
to display the PCS500R Main Menu (see example below).
•
Type the desired command and press
.
The following sections describe each of the configuration commands.
Note
: You can always press
at the
prompt to display the PCS500R Main Menu.
Example: PCS500R Main Menu
Содержание PCS500R Pro:Centric
Страница 70: ......
