manualshive.com logo in svg

LG MultiSITE VM3, Руководство для стартапов, Страница: 39 / 56

Поделиться
Скачать
LG MultiSITE VM3 Скачать руководство пользователя страница 39

39

Start-Up Guide

Due to our policy of continuous product innovation, some specifications may change without notification.  

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

A few platform configuration items in a MultiSITE VM3 are not directly accessible in a MultiSITE Supervisor platform connection to the 

controller, that is, via the Commissioning Wizard or any of the platform views. Instead, you must have a station installed and running on the 

controller (any station). Then using MultiSITE Supervisor, you open a (Fox) connection to that station, and configure these platform-related 

items by accessing services under the station’s PlatformServices container.

About Platform Services

Under its Services container, every station has a PlatformServices container.

PLATFORM SERVICES (STATION) AND 

ADMINISTRATION

Figure 29: Example of controller station’s PlatformServices.

Содержание MultiSITE VM3

























































Отзывы:

Нет отзывов