manualshive.com logo in svg

LG MultiSITE VM3, Руководство для стартапов, Страница: 15 / 56

Поделиться
Скачать
LG MultiSITE VM3 Скачать руководство пользователя страница 15

15

Start-Up Guide

Due to our policy of continuous product innovation, some specifications may change without notification.  

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

Connecting to MultiSITE VM3

Once the MultiSITE VM3 has powered up, connect to it with MultiSITE Supervisor using “Open Platform.” A platform connection to any Multi

-

SITE VM3 is required for most host-level operations. This includes installing Niagara 4.1 core software and modules and performing various 

other platform tasks.
After you open a platform connection, you can run the Commissioning Wizard.

Opening a platform connection to a MultiSITE VM3

1. From the menu bar, select File > Open > Open Platform. The Open Platform dialog box appears.
2. Complete the fields in the Open Platform dialog box as follows: 

•  Type— Select Platform Connection, if not already selected.

By default, MultiSITE Supervisor prompts for a Platform TLS Connection.

•  Host: Leave at default IP, and type in the IP address of the new MultiSITE VM3.
•  Port: Leave at default 5011.
•  Credentials, which may be the following:

 

Username: Type in default username. 

 

Password: Type in default password.

3. Click the OK button to accept all settings.
The Platform opens in the tree, and its Nav Container View displays in the view pane.

Figure 3:  Connected Platform.

PREPARATION FOR COMMISSIONING

Содержание MultiSITE VM3

























































Отзывы:

Нет отзывов