ENG
ENGLISH
12
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.
1
Connect the TV’s
HDMI IN
terminal and the SIMPLINK device’s HDMI
output terminal using an HDMI cable.
2
Select
(Settings) General SIMPLINK
.
SIMPLINK menu window appears.
3
In SIMPLINK Setting window, set SIMPLINK function to
On
.
4
Configure the
Auto Power Sync
settings to
On
or
Off
.
5
In SIMPLINK menu window, selects the device you want to control.
y
You can also set the SIMPLINK in
(Home) Inputs
SIMPLINK
.
y
This function is only compatible with devices with the
SIMPLINK logo.
y
To use the SIMPLINK function, you need to use a high-
speed HDMI® cable (with CEC (Consumer Electronics Control)
feature added). High-speed HDMI® cables have the No. 13 pin
connected for information exchange between devices.
y
If you switch to another input, the SIMPLINK device will stop.
y
If a third-party device with the HDMI-CEC function is also used,
the SIMPLINK device may not work normally.
y
If you select or play media from a the device with a home
theatre function, the
HT Speaker(Speaker)
is automatically
connected.
SIMPLINK function description
y
Direct Play
: Plays the multimedia device on the TV instantly.
y
Controlling devices with the TV remote control
: Manages
the multimedia device with the TV remote control.
y
Main Power Off
: If
Auto Power Sync
is set to
On
in the
SIMPLINK settings and turn off your TV, the devices connected
to your TV via SIMPLINK will also be turned off.
y
Main Power On
: If
Auto Power Sync
is set to
On
in the
SIMPLINK settings, turning on a SIMPLINK-linked device will
turn the TV on.
To set password
(Settings) Safety Set Password
Sets or changes the TV password.
y
The initial password is set to ‘0000’.
y
When France is selected for Country, password is not ‘0000’ but
‘1234’.
y
When France is selected for Country, password cannot be set to
‘0000’.
To specify Factory Reset
(Settings) General Reset to Initial Settings
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
y
When
Lock System
is in place, a pop-up window appears and
asks for password.
y
Do not turn off the power during initialization.
To remove the USB device
Select the connected USB HDD from
(Home)
Inputs
and
select the
Eject
button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
y
Once a USB device has been selected for removal, it can no
longer be read. Remove the USB storage device and then re-
connect it.
Using a USB storage device - warning
y
If the USB storage device has a built-in auto recognition
program or uses its own driver, it may not work.
y
Some USB storage devices may not work or may work
incorrectly.
y
Use only USB storage devices formatted with the Windows
FAT32 or NTFS File System.
y
For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
y
It is recommended that you use USB memory sticks of 32 GB or
less and USB HDDs of 2 TB or less.
y
If a USB HDD with power-saving function does not work
properly, turn the power off and on. For more information,
refer to the user manual of the USB HDD.
y
Data in the USB storage device can be damaged, so be sure to
back up important files to other devices. Data maintenance
is the user’s responsibility and the manufacturer is not
responsible for data loss.
My Media supporting file
y
Maximum data transfer rate : 20 Mbps (Mega bit per second)
y
External supported subtitle formats : *.srt (SubRip), *.smi
(SAMI), *.sub (SubViewer, MicroDVD, DVDsubtitleSystem,
SubIdx(Vobsub)), *.ass/*.ssa (SubStation Alpha), *.txt
(TMplayer), *.psb (PowerDivX)
y
Internal supported subtitle formats: *.dat/*.mpg/*.mpeg/
*.vob (DVD Subtitle), *.ts/*.tp/*.m2ts (DVB Subtitle),
*.mp4 (DVD Subtitle, UTF-8 Plain Text),
*.mkv (ASS, SSA, UTF-8 Plain Text, Universal Subtitle Format,
VobSub, DVD Subtitle), *.divx/*.avi (XSUB
1
, XSUB+)
1 XSUB : Supports internal subtitles generated from DivX6
