LG MH-1355M, Руководство по обслуживанию

Страница: 2 / 55

– 2 –
SAFETY PRECAUTIONS
This device is to be serviced only by properly qualified service personnel.
Consult the Service Manual for proper service procedures to assure continued safety operation and for
precautions to be taken to avoid possible exposure to excessive microwave energy.
— Proper operation of the microwave ovens requires that the magnetron be assembled to the wave guide and
cavity. Never operate the magnetron unless it is properly installed.
— Be sure that the magnetron gasket is properly installed around the dome of the tube whenever installing the
magnetron.
— Routine service safety procedures should be exercised at all times.
— Untrained personnel should not attempt service without a thorough review of the test procedures and safety
information contained in this manual.
PRECAUTIONS TO BE OBSERVED BEFORE
AND DURING SERVICING TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE
ENERGY
A) Do not operate or allow the oven to be operated with the door open.
B) Make the following safety checks on all ovens to be serviced before activating the magnetron
or other microwave source, and make repairs as necessary; (1) interlock operation, (2) proper
door closing, (3) seal and sealing surfaces (arcing, wear, and other damage), (4) damage to or
loosening of hinges and latches, (5) evidence of dropping or abuse.
C) Before turning on microwave power for any service test or inspection within the microwave
generating compartments, check the magnetron, wave guide or transmission line, and cavity
for proper alignment, integrity, and connections.
D) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave
generation and transmission systems shall be repaired, replaced, or adjusted by procedures
described in this manual before the oven is released to the owner.
E) A microwave leakage check to verify compliance with the Federal Performance Standard
should be performed on each oven prior to release to the owner.