manualshive.com logo in svg

LG LW8000ER, Руководство по обслуживанию, Страница: 3 / 41

Поделиться
Скачать
LG LW8000ER Скачать руководство пользователя страница 3

Service Manual  3

Safety Precautions  

WARNING

WARNING

WARNING

CAUTION

Never Do This

Always Do This

Precautions

Safety
Precautions

To prevent injury and property damage, follow these instructions. 

Incorrect operation due to ignoring instructions might cause harm or damage, the seriousness of which is

indicated by the following symbols.

■ 

The following items are classified by these symbols.

Plug in the power plug
properly.

Do not operate or stop the
unit by inserting or pulling
out the power plug.

Do not damage or use an
unspecified power cord.

• Doing so may cause electric

shock or fire due to heat

generation.

• Doing so may cause electric

shock or fire due to heat

generation.

• Doing so may cause electric shock or fire.

• If the supply cord is damaged, it must be replaced

by the manufacturer, the manufacturer's service

agent, or a similarly qualified person in order to

avoid a hazard. (Y attachment)

Do not modify power cord
length or share the outlet
with other appliances.

Do not operate with wet
hands or in damp
environment.

Always plug into a
grounded outlet.

• Doing so may cause electric shock or

fire due to heat generation.

• Doing so may cause electric

shock.

• No grounding may cause electric 

shock (See Installation Manual).

Do not allow water to run
into electric parts.

Always install air leakage
breaker and a dedicated
switching board.

Unplug the unit if strange
sounds, odors, or smoke
comes from it.

• Doing so may cause failure of

machine or electric shock.

• Failure to install these may cause

fire or electric shock accident.

• Such a unit may pose a risk of

fire or electric shock accident.

Do not use the socket if it is
loose or damaged.

Do not open the entrance
during operation.

Keep firearms away.

• Doing so may cause fire or

electric shock.

• It may cause electric shock.

Do not use the power cord close to heating
tools.

Do not use the power cord near flammable gas
or combustibles such as gasoline, benzene,
thinner, etc.

• Doing so may cause fire or electric shock.

• Doing so may lead to an explosion or fire.

This symbol shows the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to property.

Содержание LW8000ER










































Отзывы:

Нет отзывов