LG LU34 T Series, Руководство по установке

Страница: 9 / 53

ENGLISH
9
(8) Power On Default
Set the input source or Programme to display and. A/V settings when turn on power in AC Power On
or Stand-by status.
(8-1) Input Source
Set whether it is turned on by the set input source or by the last stored input source.
• It is turned on by the Last Memory Input if the
Input Source
is turned off.
• It is turned on by the Last Pr. If the Input Source is turned off and the last memory
Input is the RF.
• The available Input Source values should be rotated.
• If both the
Input Source
and the
Timer Power On
of User Menu are set, the Input
source takes the priority.
• When the
Input Source
is changed to the
TV
,
Programmes
menu is available.
• When the Input Source is changed to the ATV , the Programme No. is set to 0 . (If the
Programme map structure does not support this, it depends on model’s Programme
handling.)
• Access to an input source item and a Programme in
Timer Power On
of User Menu
must be disabled when Power On Default is activated.
(8-2) Programme
Select start Programme number if Input source’s value is TV. (in case of ATV, it means
physical Programme number.)
(8-3) A/V Setting
If A/V Setting is changed from Off to On , parameters that are set before entering
installation menu are applied whenever turn on power.
• Following Parameters are applied to basic.
- Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
- Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
- AVL (Auto Volume Level) and Language, Teletext language, ARC Data.
• Except these, other parameters are applied differently according to the TV-Set.
(8-4) Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
• The modes are as follows:
- Aspect ratio = “ Disable (0)” stays at previous state, same as consumer model.
- Aspect ratio = “
Original
(1)”
- Aspect ratio = “ 4:3 ratio (2)”
- Aspect ratio = “
16:9
ratio (3)”
• If enabled, upon power up the television resets the aspect ratio to the specified state
regardless of how the user has previously changed the aspect ratio.
• If Original is not supported, the television set the aspect ratio to 16:9 .