background image

ENGLISH

6

(4) Key Operation

 

Manage key usability of Local(Front) Key and Remote Control. When selected to 

On

, following 

IR 

Operation

 and 

Local Key Operation

 will be worked by below.

(4-1) IR Operation

Decide whether work the LG remote control or not.

 

Able to set 

Normal

Use PWR Only

Block All

 

When 

IR Operation

 is set to 

Block All

, all normal remote keys don’t work. 

Use PWR 

Only

 (Block except power) makes block all remote keys except power key.

 

Although 

IR Operation

 value is 

Use PWR Only

 or 

Block All

. It can work in service mode. 

(In-Start, In-Stop, Power-Only, ADJ, Hotel-Mode, Hotel-Mode-Ready, P-Check, S-check, 

In-Time, FMode-Init, FMode-Start, FMode-AV, FMode-F1)

 

Menu key action to enter the installation menu and key action with special menu(In-

Start / EZ-Adjust …) are still available.

 

When 

IR Operation

 is set to 

Normal

 (Work), all remote keys are available.

(4-2) Local Key Operation

Decide to operate Local/Front Key working behavior by setting 

Local Key Operation

 as 

Normal

Use PWR Only

Block All

 

When 

Local Key Operation

 is set to 

Block All

, all local keys don’t work. (If value is 

Use 

PWR Only

, it blocks all local keys except power key.)

 

When 

Local Key Operation

 is set to 

Normal

, all local key are available.

Exception) 

In case of power off condition with all key are blocked, 

Power On Status

 value turns to 

PWR

, and disabled status to fix value for power on operation. (fool-proof routine)

Содержание LU34 T Series






















































Отзывы: