LG LU34 T Series, Руководство по установке

Страница: 47 / 53

ENGLISH
47
1 Power (Command: k a)
►
To control power on or off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Off
Data 01 : On
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
►
To show TV is power on or *Off
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement
feedback presents status about each
function.
* OK Ack., Error Ack. and other message may
display on the screen when TV is power on.
2 Aspect Ratio (Command: k c) (Main
Picture Size)
►
To adjust the screen format. (Main picture
format) You can also adjust the screen
format using the picture settings.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : 4:3 (Just Scan: Off)
Data 02 : 16:9 (Just Scan: Off)
Data 06 : Original (Just Scan: Off)
Data 09 : Just Scan (Ratio is fixed to 16:9)
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or
4:3 screen aspect ratio.
* In DTV/HDMI/Component mode (high-
definition), Just Scan is available.
* Full wide mode may work differently based
on model and is supported for DTV fully, and
ATV, AV partially.
3 Screen Mute (Command: k d)
►
To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on) / Video
mute off
Data 01 : Screen mute on (Picture off)
Data 10 : Video mute on
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display
On Screen Display(OSD). But, in case of
Screen mute on, TV will not display OSD.
4 Volume Mute (Command: k e)
►
To control volume mute on/off. You can
also adjust mute using the mute button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
5 Volume Control
(Command: k f)
►
To adjust volume. You can also adjust
volume with the volume buttons on remote
control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
6 Contrast (Command: k g)
►
To adjust screen contrast. You can also
adjust contrast in the picture settings.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]