LG LSE3092ST Скачать руководство пользователя страница 13

Страница: 13 / 85

2-4

USING YOUR RANGE

1. SETTING THE CLOCK

2. START, CLEAR/OFF AND ON/OFF PAD

1. Touch

START

pad to start oven.

2. Touch

CLEAR/OFF

pad to cancel a program

during cooking or Erase during programming.

3. Touch

ON/OFF

pad to start or cancel the

surface unit.

3. TO TURN ON/OFF THE OVEN LIGHT

The oven light automatically turns ON when the
door is opened. The oven light may also be
manually turned ON or OFF by pressing the

OVEN LIGHT

pad

NOTE:

The oven light cannot be turned on if self-clean
feature is active.

4. TIMER ON/OFF

To cancel timer at any time, touch

TIMER ON/OFF

pad.

NOTE:

1. If you press

TIMER ON/OFF

pad once, this allows you to

select "seconds"
(for example: if you press “5” and “6”, it means 56 seconds)

2. If you press

TIMER ON/OFF

pad twice, this allows you to

select "minutes"
(for example: if you press “5” and “6”, it means 56 minutes)

5. SPECIAL FUNCTION: 6 types of category

1) CONVECTION AUTO CONVERSION

1. Touch and hold the

WARM/PROOF

pad for

3 seconds

2. Touch

“1”

pad for ENABLE

“2”

pad for DISABLE

3. Touch

START

pad.

2) THERMOSTAT ADJUSTMENT

The oven temperature can be adjusted from
-35°F (-19°C) to 35°F (19°C).

NOTE:

The temperature adjustments made with this feature
will just change Bake, Convection Bake and
Convection Roast temperature.

To increase the oven temperature:

1. Touch and hold the

WARM/PROOF

pad for

3 seconds.

2. Touch the WARM/PROOF pad 1 time

3. Touch the desired temperature

4. Touch

START

pad.

To decrease the oven temperature:

1. Touch and hold the WARM/PROOF pad for

3 seconds

2. Touch the WARM/PROOF pad 1 time

3. Touch

the desired temperature

4. Touch the

WARM/PROOF

pad once

5. Touch

START

pad

3) LANGUAGE SELECTION(English or

French)

1. Touch and hold the WARM/PROOF pad for

3 seconds

2. Touch the WARM/PROOF pad 2 time
3. Touch “1” pad for ENGLISH

or “2” pad for SPANISH
or “3” pad for FRENCH

4. Touch “START” pad

4) PREHEATING ALARM LIGHT ON/OFF

1. Touch and hold the

WARM/PROOF

pad for

3 seconds

2. Touch the

WARM/PROOF

pad

3 time

3. Touch “1” pad for ON

or “2” pad for OFF

4. Touch START pad

CLEAR

/OFF

CLOCK

Desired

Time

START

TIMER

ON/OFF

Desired

Time

TIMER

ON/OFF

Содержание LSE3092ST






















































































Результаты поиска

Содержание LSE3092ST

Отзывы:

LG LSE3092ST, Руководство по обслуживанию, Страница: 13 / 85

Результаты поиска

Содержание LSE3092ST

Отзывы: