46
ENG
ENGLISH
TELETEXT
TELETEXT
y
y
This feature is not available in all countries.
Teletext is a free service broadcast by most TV
stations which gives up-to-theminute information
on news, weather, television programmes, share
prices and many other topics.
The teletext decoder of this TV can support
the SIMPLE and FASTEXT systems. SIMPLE
(standard teletext) consists of a number of
pages which are selected by directly entering
the corresponding page number. FASTEXT are
more modern methods allowing quick and easy
selection of teletext information.
Switch On/Off
Press the
TEXT
button to switch to teletext. The
initial page or last page viewed appears on the
screen.
Two page numbers, TV station name, date and
time are displayed on the screen headline. The
first page number indicates your selection, while
the second shows the current page displayed.
Press the
TEXT
button to switch off teletext. The
previous mode reappears.
Simple Text
Page selection
1 Enter the desired page number as a three digit
number with the NUMBER buttons. If during
selection you press a wrong number, you must
complete the three digit number and then re-
enter the correct page number.
2 The
P
+ -
button can be used to select the
preceding or following page.
Fastext
The teletext pages are colour coded along the bot-
tom of the screen and are selected by pressing the
corresponding coloured button.
Page selection
1 Press the
ꔻ
button to select the index page.
2 You can select the pages which are colour
coded along the bottom line with corresponding
coloured buttons.
3 AS with SIMPLE teletext mode, you can select
a page by entering its three digit page number
with the Number buttons in FASTEXT mode.
4 The
P
+ -
button can be used to select the
preceding or following page.
Programming a colour button in
LIST mode
If the TV is in SIMPLE text or FASTEXT mode,
press the
ꔻ
button to switch to
LIST
mode.
Four teletext page numbers of your choice can
be colour coded and easily selected by pressing
the corresponding coloured button on the remote
control handset.
1 Press a coloured button.
2 Using the Number buttons, select the page you
wish to programme.
3 Press the
OK
button. The selected page is
stored as the selected page number, blinking
once to confirm this. From now on, you can
select this page with the same coloured button.
4 The three other coloured buttons are
programmed in this way.
